首页|领导致辞|公司简介|公司规模|公司荣誉|中意合资|公司文化|产品系列|服务支持|联系信息

 

DTM139 细纱机 DTM139 Ring Spinning Frame

重要特点

  一、前罗拉传动、中后罗拉传动、钢领板升降传动、集体落纱均采用世界先进的电子伺服传动系统。取代传统的齿轮传动,噪声低、速度快,成纱质量高。
  二、纺纱工艺参数改变无需变换齿轮,可根据任何一种不同纺纱工艺在电子操作屏上完成。
  三、集体落纱,稳定可靠。
  四、可以与粗纱机、络筒机任意联接,自动化程度高。
  五、锭子传动采用专用变频器变速,可根据纺纱张力设定纺纱过程中各阶段的锭速。

Important characteristic

  1.The driving of front roller,middle-rear roller,lifting of ring rail and integrated doffing used the advanced electron driving system in the world instead of the gear driving of tradition and this enable low noise,high speed and good yarn quality.
  2.The spinning technical data can changed through various kinds of spinning technology on the eletron screen and the gear is unnecessary to change.
  3.Integrated doffing is reliable and stable.
  4.Level of automation is high and can connect with roving frame and winding frame wantonly.
  5.The change of speed of spindle driving used special inverter and can set spindle speed of various phases according to the tention of spinning.

  • DTM139型细纱机,品质之优、性能之佳、速度之高是当今最理想的细纱机。
  • Model DTM139 Ring Spinning Frame,with its high quality,optimum properties and high speed,is one of the best ring spinning machines in China.
  • 全新设计 面向80支以上的高支纱
  • 产量更高 在14000-22000转/分的高速状态下亦能平稳地运行。
  • 质量更好 纺制的细纱质量与效率在国内同类产品中处领先地位。

  • NEW DESIGN
    To process the yarn with high quality,especially for those with the yarn count above 80 Ne.
  • High PRODUCTIVITY
    14,000-22000 RPM,running with high stability under such a high speed.
  • GOOD YARN QUALITY
    Its spun yarn quality and profits take a leading position among the user in China.

  • 这种形式的夹纱器减少了落纱次数因而增加了环锭细纱机和络筒机的效率
    This type of gripper reduces the number of doffing cycles and increases the efficiency of ring frames and winders.

  • 这些方法可以保证用最低的生产成本获得最大可能的生产率
    These solutions ensure the highest possible productivity with the lowest operational cost.

  • 钢领板通过伺服电机独立驱动
    The ring rail has an independent drive through a brushless motor.

  • 牵伸罗拉通过两个伺服电机独立驱动
    The drafting cylinders have two separate drives(one on each side of the frame) through brushless motors.

  • 牵伸系统
    优化设计,高精度制造,切实保证生产优质细纱。适应性广,可根据您的需要配备各种国产、进口摇架。
  • DRAFTING SYSTEM
    Its optimum design and high manufacturing precision ensure the producing of high quality yarn,and can be equipped with all kinds of drafting systems,such as SKF,Ina,and so on.

  • 变速控制系统
    本机可采用世界先进进口变频系统,特别设计、性能稳定,具有散热性能好,密封防尘可靠。
  • INVERTOR
    The invertor can be adopted as an option to adjust the spinning speed,and set different speed - adjusting curves according to different requirements from the customer.

  • 牵伸传动配有中日合资生产的自动滴油润滑系统,油滴大小可根据需要合理调整。
    The drafting driving system is fitted with auto - dripping lubrication system made by a Sino - Japan joint venture and the quantum of the oil can be adjusted according to the requirements.

  • 吹吸风清洁装置,纺氨纶包芯纱装置由用户选用。
    The overhead blower and the device for producing spandex core spun yarn are at users'option.









  • 技术参数 Main Specifications
    锭距 70mm Spindle gauge 70mm
    锭数

    1008,624,516,504,492,480,456,444,
    420,408,396,…96,72

    No.of spindle 1008,624,516,504,492,480,456,444,
    420,408,396,…96,72
    钢领直径 38,42,45mm Dia of ring 38,42,45mm
    筒管长度 200,220,230mm Tube length 200,220,230mm
    适纺线密度 5~98.5tex(120~6Ne) Yam count 5~98.5tex(120~6Ne)
    牵伸倍数 10~70倍 Drafting times 10~70
    捻度 510~1850捻/m(根据用户要求而变化) Twist range 510~1,850T/m(vary as required)
    锭速 12000~22000r/min Spindle speed 12,000~22,000r/min
    捻向 Z,Z或S Twist Z,Z or S
    粗纱卷装 Ø 135*320mm,Ø 152*406mm(Max) Roving package Ø 135*320mm,Ø 152*406mm(Max)
    适纺纤维 棉、棉型化纤及51毫米以下中长化纤的纯纺或混纺 Spinnable fibres cotton,cotton-type chemical fibre and medium synthetic fibre up to 51mm or their blends

    如果您希望订购这款产品或需要深入了解这款产品,请 点击此处

     

    产品关键词:   

     

          服务电话:+86 515 5213872  24小时热线:+86 515 5212538 技术支持:数字引擎网络技术公司