首页|领导致辞|公司简介|公司规模|公司荣誉|中意合资|公司文化|产品系列|服务支持|联系信息

 

FB504A 细纱机 FB504A Ring Spinning Frame
  • 用途:
    适用纤维平均长度65~100mm羊毛、毛型化纤的纯纺或混纺,纺制精梳毛针织绒纱或精梳毛纱。

  • 特点:
    狭幅机身,占地面积小
    闭式传动齿轮箱
    可采用变频调速
    用可编程控器控制纺纱过程
    数显工艺参数
    成纱卷装容量大,断头率低,可显著提高产量,降低消耗

  • Usege:
    Suitable fiber Length:65~100mm wool type synthetical fiber,sheep wool and their blends.
    This machine is economically and technically suitable for the production of the combed - worsted knitting yarn and worsted yarm.

  • Main Features:
    The compact machine frame contribute to the less covered area.
    The closed gear box.
    The frequency inverter.
    The controllable spinning process by use of PC.
    The technical date demoustration.
    The big package and low end breakage result in higher production output and less energy consumption.

  • 车头传动
    新颖、封闭的油浴齿轮箱结构。制造精度高,润滑条件好,使用寿命长。
  • HEADSTOCK DRIVING
    With new and sealed oil - bath gear box,its high manufacturing precision and lubrcation condition can extend its using life.

  • 级升装置
    使用离合器级升机构。不需调换棘轮,即可精确调整级升量,防倒撑牙可杜绝坏纱发生。
  • STEP - LIFTING SYSTEM
    With the clutch,its steplifting precision can avoid the defective yarn

  • 牵伸传动配有中日合资生产的自动滴油润滑系统,油滴大小可根据需要合理调理。
  • The drafting drving system is fitted with auto - drafting lubrication system made by a Sino - japan joint venture and the quantum of the oil can be adjusted according to the requirements.

  • 变速控制系统
    本机可采用专用进口变频器,该变频器系特别设计并具有散热性能好,密封防尘可靠。
  • INVERTOR
    The vertor can be adopted as an option to adjust the spinning speed,and set different speed - adjusting curves according to different requirements form the customer.





  •  


    主要规格与技术参数 Specifications and Tchnical Date
    锭距
    Spindle gauge(mm)
    82.5mm
    锭数
    No.of spindle

    384,372,360,96等,基本锭数384锭
    384,372,360,96and so on,standard type384

    钢领
    Steel Ring
    锥面粉末冶金钢领;直径为55.60(mm)
    cone type metallurgically sintered ring.dia.55.60(mm)
    筒管长度(mm)
    Bobbin Length
    285
    适纺纤维长度
    Pemissible Fiber Length(mm)
    平均长度65~100
    average length 65~100
    纺纱线密度tex
    Density of Yarm tex
    12.5~62.5(16~80Nm)
    牵伸形式
    Drafting Type
    三罗拉、上短下长皮圈,螺旋弹簧摇架加压
    3-roller drafting system with pendulum arm weighting and double apron.
    牵伸倍数
    Drafting Ratio
    12~40倍
    输出上罗拉直径(mm)
    Upper Roller Dia.for Delivery Roller (with cot)(mm)
    50(包覆后)
    中间上罗拉直径(mm)
    Upper Roller Dia.for Middle-in Roller (with cot)(mm)
    48(包覆后)滑溜槽宽20
    喂入上罗拉直径(mm)
    Upper Roller Dia.for Taking-in Roller (with cot)(mm)
    50(包覆后)
    下罗拉直径
    Bottom Roller(mm)
    均为35
    all 35
    锭速
    Spindle Speed(r/min)
    5000~13000
    粗纱卷装
    Roving Package(mm)
    无捻(双根)Ø 300*190~230 有捻(单根)Ø 155*280
    2 pieces(twistless roving Ø 300*190~230) 1 piece(twist roving)Ø 155*280

    如果您希望订购这款产品或需要深入了解这款产品,请 点击此处

     

    产品关键词:   

     

          服务电话:+86 515 5213872  24小时热线:+86 515 5212538 技术支持:数字引擎网络技术公司