首页|领导致辞|公司简介|公司规模|公司荣誉|中意合资|公司文化|产品系列|服务支持|联系信息

 

DTM126 细纱机 DTM126 Ring Spinning Frame
  • DTM126型细纱机是在FA系列细纱机的基础上,吸收了DTM系列细纱机的特点,集合了市场的综合情况而设计的新型细纱机。
  • Model DTM126 ring spinning frame is a new-type ring spinning frame,which is improved on the basis of the FA ring spinning frame series and absorbs the consistent advantages of the DTM ring spinning frame series to keep up the needs of the market.

主要规格 Main Specifications
锭距 70mm Spindle gauge 70mm
锭数 516,504,492,480,456,444,420, No. of spindle 504,492,480,456,444,420,
  408,396,384,372,360,96锭等   408,396,384,372,360,96 etc.
钢领直径 35,38,40,42,45mm Dia. of ring 35,38,40,42,45mm
筒管长度 180,190,205,230mm Tube length 180,190,205,230mm
适纺线密度 经纱 6~96tex(100~6Ne)一般供应13~36tex(45~6Ne)直接纬纱14~48tex(42~12Ne) Yarn Count Warp yarn 6~96tex(100~6Ne) Normal 13~36tex(45~6Ne) Direct weft14~48tex(42~12Ne)
牵伸倍数 10-50倍 Drafting Times 10-50
捻度 260-1500捻/m Twist Range 260-1500t/m
锭速 10000-17000r/min Spindle Speed 1000-17000r/min
常规范围12400-16000r/min Normal 12400-16000r/min
捻向 Z,Z或S Twist Z,Z or S
粗纱卷装 Ø 152×406mm(Max) RovingPackage Ø 152×406mm(Max)
变速形式 高强度平皮带传动,4/6极电机变速 Speed change type Driving by high-tenacity flat leather belt,and speed chang by 4/6 pole electronic machinery.
断头吸入装置 笛管式,每台有单独风机,1800m3/h要求有集体地下排风接力风机 Break-end suction system Flute type each frame has an independent suction motor,and 1800m3/h has underground collective exhausting
锭带张力轮形式 单张力轮或双张力轮 Spindle tape tension block type Single or double tension block
自动机构 (1)纺纱过程中,无论何时关车,能自动适位停车 Automatic Structure 1.The frame can stop at a proper position automatically,whenever it is required during the spinning process.
(2)如需提前落纱,能使钢板自动下降及自动适位停车 2.if needed,the ring rail will wind down and stop automatically at a proper position.
(3)满管后,钢板自动下降及自动适位停车 3.when full bobbin,the ring rail will wind down and stop automatically at a proper position.
(4)开车前能使钢领板自动复位 4.Before starting the machine,the ring rails will reset themselves at the staring position automatically.
(5)纺直接纬纱能自动绕取保险纱 5.When spin direet weft,it can revolve around the bottom bunching automatically.
(6)纺纱过程中能自动变换锭速,也能手动变换锭速 6.The spindle speed can be altered both automatically and manually,during the spinning process.
电动机 主电动机380V 15/7KW(420锭),其余按照锭数确定 Electronic motor Main electronic 380V 15/7kw(420 spindles),(other be fixed according to the number of spindle)
吸风电动机380V 2.2KW(420锭) Suction electronic motor 380V 2.2kw(420 spindles)
钢领板升降电机 380V 0.37kw Lifting motor for ring platc 380V 0.37kw
长度 L=1890+(n/2 -1)x70mm n-锭数 Length L=1890+(n/2 -1)x70mm n-number of spindle
宽度 1000mm Width 1000mm
高度 托锭 吊锭 Height Spindle supporter spindle hanger
粗纱卷绕Φ135x230mm 粗纱卷绕Φ135x230mm 粗纱卷绕Φ152x406mm Roving winding Φ135x230mm Roving winding Φ135x230mm Roving winding Φ135x230mm
2050mm 2370mm 2495mm 2050mm 2370mm 2495mm
重量 约6T(420锭) Weight About 6T(420 spindles)


如果您希望订购这款产品或需要深入了解这款产品,请 点击此处

 

产品关键词:   

 

      服务电话:+86 515 5213872  24小时热线:+86 515 5212538 技术支持:数字引擎网络技术公司